Laticrete HYDRO BAN®

Description:

HYDRO BAN® Fillet & Sealant is a one component, fast curing, hybrid elastomeric adhesive and sealant.

HYDRO BAN^® is a thin, load bearing waterproofing/crack isolation membrane that does not require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self-curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. It bonds directly to a wide variety of substrates.

Equipped with Microban antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane.

Features & Benefits:

• Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
• Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
• Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
• Bonds directly to metal
• PVC and ABS plumbing fixtures only
• Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
• “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
• Changes in color from a light sage to an olive green when cured
• Equipped with Microban® antimicrobial product protection to fight the growth of stain-causing mold and mildew on the waterproofing membrane
• Rapid drying for a faster time to tile
• Install tile, brick and stone directly onto membrane
• Exceeds ANSI A118.10 and A118.12
• IAPMO approved
• Lighter color for ease of inspection
• Non-flammable

Technical Documents:

• SDS (Safety Data Sheet)
•